TechnoTrend TT-connect S2-4600: Difference between revisions
mNo edit summary |
|||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]]. |
A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]]. Supported natively since kernel 4.2. |
||
[[File:TechnoTrend_S2-4600.jpg|200px|thumb|right|TechnoTrend S2-4600 PCB]] |
|||
==Overview/Features== |
==Overview/Features== |
||
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 |
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 transponders. It comes with a 12V 1.5A power adapter. Open source drivers are part of the media_tree and will be in kernel 4.1 (but 4.2 contains important fix that is needed if using some applications such as VDR). For older kernels media_build can be used to add support. |
||
This card works in |
This card also works in with the Liplianin drivers, which are a bit outdated by now though. |
||
Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/ |
Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/DVBSky (in case Liplianin doesn't compile for you either). |
||
==Components used== |
==Components used== |
||
Line 25: | Line 27: | ||
When using the open source drivers, the firmware for M88DS3103 is needed: dvb-demod-m88ds3103.fw. Available [http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ here]. |
When using the open source drivers, the firmware for M88DS3103 is needed: dvb-demod-m88ds3103.fw. Available [http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ here]. |
||
When using the Liplianin drivers, |
When using the old Liplianin drivers, the firmware needed is different and must be sourced elsewhere (dvb-fe-ds3103.fw). |
||
==Identification== |
==Identification== |
||
=== |
===Kernel drivers=== |
||
<pre> |
<pre> |
Revision as of 06:11, 16 May 2015
A DVB-S2 USB 2.0 Device from TechnoTrend. Supported natively since kernel 4.2.
Overview/Features
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 transponders. It comes with a 12V 1.5A power adapter. Open source drivers are part of the media_tree and will be in kernel 4.1 (but 4.2 contains important fix that is needed if using some applications such as VDR). For older kernels media_build can be used to add support.
This card also works in with the Liplianin drivers, which are a bit outdated by now though.
Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/DVBSky (in case Liplianin doesn't compile for you either).
Components used
Identification
Vendor ID: 0B48
Product ID: 3011
/home/pi# lsusb Bus 001 Device 005: ID 0b48:3011 TechnoTrend AG
Firmware
When using the open source drivers, the firmware for M88DS3103 is needed: dvb-demod-m88ds3103.fw. Available here.
When using the old Liplianin drivers, the firmware needed is different and must be sourced elsewhere (dvb-fe-ds3103.fw).
Identification
Kernel drivers
[72834.982925] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state. [72834.983157] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [72834.983358] DVB: registering new adapter (TechnoTrend TT-connect S2-4600) [72834.983450] usb 2-2: media controller created [72834.987975] dvb-usb: MAC address: bc:ea:2b:46:12:92 [72834.988287] dvb_register_media_device: media device 'dvb-demux' registered. [72834.988418] dvb_register_media_device: media device 'dvb-dvr' registered. [72834.988590] dvb_register_media_device: media device 'dvb-net' registered. [72835.297899] i2c i2c-0: Added multiplexed i2c bus 1 [72835.378739] m88ts2022 1-0060: Montage M88TS2022 successfully identified [72835.378753] usb 2-2: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)... [72835.378886] dvb_register_media_device: media device 'Montage M88DS3103' registered. [72835.379237] Registered IR keymap rc-tt-1500 [72835.379376] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0/input9 [72835.379505] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0 [72835.379508] dvb-usb: schedule remote query interval to 250 msecs. [72835.379514] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected. [72835.379551] usbcore: registered new interface driver dw2102 [72973.534136] i2c i2c-0: m88ds3103: found a 'Montage M88DS3103' in cold state [72973.534169] i2c i2c-0: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw' [72974.592456] i2c i2c-0: m88ds3103: found a 'Montage M88DS3103' in warm state [72974.592461] i2c i2c-0: m88ds3103: firmware version 3.B
Liplianin
dvb-usb: found a 'TT Connect S2 4600' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (TT Connect S2 4600) dvb-usb: MAC address: 00:00:00:00:00:00 ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)... usb 1-4.3: DVB: registering adapter 0 frontend 0 (Montage Technology DS3103/TS2022)... dvb-usb: TT Connect S2 4600 successfully initialized and connected
(Some output snipped).