User:Woodsb02

From LinuxTVWiki
Revision as of 12:37, 17 August 2006 by Woodsb02 (talk | contribs)
Jump to navigation Jump to search
Yuan PD300 Package
Yuan PD300 USBStick
Inside USBStick 1
Inside USBStick 2

I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.


Details


Note: I have recently got this to work with linux!

Here is how I did it:

I edited

linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h

and changed USB_PID_WT220U_COLD from 0x0222 to 0x0220 and everything worked fine. Thanks to jochen and David May.


Other details of card:

lsusb gives the following output:

Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E


The chips inside it have the following writing:

1) EPCOS X7350P 3356 MXT5

2) MT2060 MOE360007J 0305-A3

3) I3 D AT02

4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612

5) 1B15C

6) AIPE12


Other text on the board:

- PD-300 REV 2.3 MADE IN TAIWAN

- BT B 94V-0 0522

- T0540113 (sticker)


News:

It will work but ONLY if you warm boot it inside windows first with the Yakumo BDA driver, then warm boot for instance a KENOTIX 2006 easter-rc4 livecd.

The second you unplug it and replug it, it will not come back up as there's something not right with the linux firmware usb loading side.

Is this problem of a cold boot firmware well known? And is there a fix?

Here's my info for my card

$ lsusb -v

Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E

Device Descriptor:

 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 idVendor           0x14aa AVerMedia (again) or C&E
 idProduct          0x0221 
 bcdDevice            5.21
 iManufacturer           1 Digital TV Receiver
 iProduct                2 Digital TV Receiver
 iSerial                 0 
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           64
   bNumInterfaces          2
   bConfigurationValue     1
   iConfiguration          0 
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              450mA "


$ dmesg

dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.

usbcore: registered new driver dvb_usb_dtt200u "


$ lsmod

dvb_usb_dtt200u 8708 0

dvb_usb 16136 1 dvb_usb_dtt200u

dvb_core 73792 1 dvb_usb

dvb_pll 10372 1 dvb_usb "