Hi Michal : Sorry was away yesterday ... tzap -r <CHANNEL> and then in another window : cat /dev/dvb/adapter0/dvr0 | ts2ps 600 601 | mplayer -vm -x 640 -y 480 -cache 4096 - Is a lot lot better :) Why is tzap okay and not dvbstream ? On Sat, 2003-06-07 at 12:32, michal wrote: > It's really very broken ... > > [root@vonasek tmp]# cat broken.ts | TScheckcontinuity > New pid (600) found > New pid (601) found > Discontinuity found, pid 600, frame 88 > 15 0 15 14 13 > Discontinuity found, pid 601, frame 98 > 11 2 1 0 15 > Discontinuity found, pid 600, frame 504 > 1 7 6 5 4 > Discontinuity found, pid 601, frame 519 > 3 1 0 15 14 > Discontinuity found, pid 600, frame 1058 > 8 12 11 10 9 > Discontinuity found, pid 601, frame 1079 > 2 0 15 14 13 > Discontinuity found, pid 600, frame 1887 > 3 6 5 4 3 > Discontinuity found, pid 600, frame 2439 > 7 12 11 10 9 > Discontinuity found, pid 601, frame 2451 > 0 13 12 11 10 > and so on ... > > I don't know if it'll help, but try to setup also another parameters like > -qam X DVB-T modulation - 16, 32, 64 (default), 128 or 256 > -gi N DVB-T guard interval 1_N (N=32 (default), 16, 8 or 4) > -cr N DVB-T code rate. N=AUTO, 1_2, 2_3 (default), 3_4, 5_6, 7_8 > -bw N DVB-T bandwidth (Mhz) - N=6, 7 or 8 (default) > -tm N DVB-T transmission mode - N=2 (default) or 8 > > And what shows tzap? > Try configure ~/.tzap/channels.conf and run following on separate consoles: > tzap -r CHANNEL > cat /dev/dvb/adapter0/dvr0 | xine - > > Michal > > > --[ UxBoD ]-- wrote: > > Okay I have upload some stream using : > > > > dvbstream -f 641833 -v 600 -a 601 -o > /tmp/broken.ts > > > > it is at : > > > > http://www.splatnix.net/broken.ts > > > > regards > > > > Phil -- // --[ UxBoD ]-- // 2.4.20-gentoo-r5 // Pentium(R) 4 CPU 2.53GHz // // gpg --keyserver wwwkeys.pgp.net --recv-keys 56ED1CB5 //
Attachment:
signature.asc
Description: This is a digitally signed message part