From: Stefan Norberg [mailto:stefan@orbisec.com]
Sent: Tuesday, June 10, 2003 11:16 PM
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Re: hw_sections=0 causes disrupted recordings
I have two cards (DVB-C and DVB-T - I've had two DVB-C cards too) with
hw_sections=0 and I do not have any problems with recording
specifically.
I 'only' experience general unstability with two cards. Often
the screen
just stays blank on one of the cards after a while. Need to reload
driver to resolve problems. When the system is ok, recordings are
perfect.
to all - please be more specific about the hardware, driver/firmware and
vdr (modded, any plugins?)version you are talking about
2 full dvb-s with driver 24.05.03 and hw_sections=0, i have no problems,
with the latest driver (i.e. 08.06.03) and hw_sections=0 i do have the
strange damaged recordings (hw_sections=1 is ok), tested the recordings
with pvastrumento and there where frames missing (=no replay problem)
all tested with vdr 1.2.1
could you please review the changes (cvsps is a fine utility to do this
and apply partial patchsets only) and report which CVS commit introduced
the problem?