[linux-dvb] Re: dvb_bt8xx: unable to determine DMA core of card 0

["Joseph H. Fry" <joe@thefrys.com>]

Solved my own problem... for anyone else with this problem, here is what
I was doing wrong: 

in all my attempts to get this working I had configure "Bt87x Audio
Capture" to compile into the kernel 

Device Drivers -> Sound -> Advanced Linux Sound Architecture -> PCI
devices -> <*> Bt87x Audio Capture 

This SHOULD NOT be compiled into the kernel if you want the VP-1020 to
work!

Well now to figure out all this VDR stuff!

> -----Original Message-----
> From: linux-dvb-bounce@linuxtv.org
[mailto:linux-dvb-bounce@linuxtv.org]
> On Behalf Of Joseph H. Fry
> Sent: Thursday, April 29, 2004 12:13 AM
> To: linux-dvb@linuxtv.org
> Subject: [linux-dvb] dvb_bt8xx: unable to determine DMA core of card 0
> 
> When loading the modules to get my VP-1020 card running I get this
> output in dmesg after running "modprobe dvb_bt8xx"
> 
> bt878: AUDIO driver version 0.0.0 loaded
> dvb_bt8xx: unable to determine DMA core of card 0
> attach: checking "monid"
> attach: checking "dvi"
> attach: checking "vga"
> attach: checking "crt2"
> attach: checking "bt878 #0 [hw]"
> find by pci: checking "bt878 #0 [hw]"
> 
> Then if I try to "modprobe dst" I get nothing, and no entrys are added
> under /dev/dvb
> 
> Any chance anyone know's whats causing this... I think the error is
the
> whole "unable to determine DMA core of card 0"... so I'm curious if
it's
> something to do with my PCI settings in bios or in the kernel. I read
> somewhere that moving the card to a different slot helped someone get
> past this problem, but after trying it I had no success.
> 
> Any suggestions would be greatly appreciated!
> 
> 
> 
> --
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe
linux-
> dvb" as subject.





-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.