[vdr] Re: Additional remotes with the remote plugin

[Mattia Rossi <mattia@technologist.com>]

> > Any other ideas?
> 
> - Check whether the receiver of your soundcard is supported by LIRC.
>   If yes, install LIRC and compile vdr with REMOTE=LIRC.

It is supported by LIRC with the homebrew circuit, I am using it and here's my lircd.conf:


# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.6.6-CVS(serial) on Wed Jun  5 13:59:55 2002
#
# contributed by
#
# brand:                       /tmp/lircd.rm9003
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  /tmp/lircd.rm9003
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9096  4758
  one           522  1761
  zero          522   624
  ptrail        522
  repeat       9096  2293
  pre_data_bits   16
  pre_data       0x8322
  gap          107969
  min_repeat      1
  toggle_bit      0


      begin codes
          1                        0x0000000000008B74
          2                        0x0000000000008F70
          3                        0x000000000000906F
          4                        0x0000000000008A75
          5                        0x000000000000847B
          6                        0x0000000000007887
          7                        0x0000000000008976
          8                        0x000000000000837C
          9                        0x0000000000007788
          0                        0x000000000000807F
          Red                      0x000000000000857A
          Green                    0x0000000000007986
          Yellow                   0x0000000000007D82
          Blue                     0x0000000000007F80
          b1                       0x0000000000007A85
          b2                       0x0000000000007E81
          Mute                     0x0000000000006E91
          Volume-                  0x000000000000639C
          Volume+                  0x000000000000629D
          Ok                       0x0000000000007C83
          Back                     0x0000000000008E71
          ch+                      0x000000000000827D
          ch-                      0x0000000000008877
          Menu                     0x000000000000817E
          Up                       0x0000000000007B84
          Down                     0x0000000000008D72
          Left                     0x0000000000008778
          Right                    0x000000000000758A
          Power                    0x0000000000007689
          Reset                    0x0000000000008C73
      end codes

end remote


Mattia


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.