[vdr] Re: CAM status in VDR 1.1.22

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Mattia Rossi wrote:
> 
> On Tue, 14 Jan 2003 19:07:15 +0100
> Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> wrote:
> 
> > Adrian Carpenter wrote:
> > >
> > > If it didn't cost to much (to send from UK), I could loan you my CI if this
> > > would help matters?
> >
> > Let's first see if this data collection gets us any further.
> >
> > Klaus
> 
> I have a CI rev. 1.6 with an Aston cam 1.05 (well, I actually have two CIs and two cams).
> Card is a nexus-s rev 2.1 (for what it matters)
> 
> I only get this:
> make insmod:
> Jan 15 01:20:52 star kernel: Linux video capture interface: v1.00
> Jan 15 01:20:52 star kernel: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
> Jan 15 01:20:52 star kernel: DVB: registering frontend 0:0 (stv0299 based (e.g. Alps BSRU6 or LG TDQB-S00x))...
> Jan 15 01:20:55 star kernel: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app c0012110
> Jan 15 01:20:55 star kernel: av7110: Warning: you are using the experimental LL firmware!
> Jan 15 01:20:55 star kernel:         Please report problems and success stories to kls@cadsoft.de.
> Jan 15 01:20:55 star kernel:         Don't use this firmware for production, don't redistribute it.
> Jan 15 01:20:55 star kernel:         Get updates from the VDR homepage until this firmware is part of
> Jan 15 01:20:55 star kernel:         the public LinuxDVB CVS!
> 
> vdr -l3 (with debugging active):
> Jan 15 01:21:54 star vdr[3085]: VDR version 1.1.21 started
> Jan 15 01:21:54 star vdr[3085]: loading /video/setup.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/sources.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/diseqc.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/channels.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/svdrphosts.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/ca.conf
> Jan 15 01:21:54 star vdr[3085]: loading /video/remote.conf
> Jan 15 01:21:58 star vdr[3085]: CAM: no CAM detected
> Jan 15 01:21:58 star vdr[3085]: found 1 video device
> 
> .. and then nothing.
> I tried with the card inserted in the slot believed to be #0 (the one closer to the pcb), with the other, at a certain point I even wondered wheter stuffing the cam in the wrong way would give some results :(
> 
> Mattia
> 
> PS:
> The same cam in my humax 5400 works without any problem

So I assume the corresponding entry to my 'cams.txt' would be

Aston 1.05                       ok     0=fail fail   fail   fail   fail   fail   fail   fail
CI rev. 1.6 (???)                       1=fail

right?

Is your CI one of the '3.5"' (one that goes into a 3.5" drive bay) or the "PCI"
model (that's the one that is mounted like a normal PCI card).

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.