[vdr] transfermode DVB-T UK - audio before video / deadlocks? (was: vdr + dxr3 plugin not quite right)

[Gregor Lawatscheck <gpel@mpex.net>]

At 09:18 27/01/2003, you wrote:
> I finally had some success with this yesterday :-) I am using
> vdr-1.1.21 and linux-dvb.2002-12-08
>
> I made a few entries in the channels.conf by copying info from
> my Nokia STB's info screen.
>
> It seems vdr/vdr-dxr3 doesn't work too well without a signal, the
> OSD shows up fine when the system is displaying a TV picture.
Good to hear you have some success.

I'm currently trying to figure out why BBC2 and BBC News 24 lock up here on 
transfer mode and newer versions of vdr. It seems that with 1.1.2x compared 
to 1.1.13 on all channels the audio appears before the picture in transfer 
mode. Any ideas why that would be -- can this have anything to do with drivers?

3 times out of 4 now on these two channels the audio will start for around 
1 sec but no picture will appear, the buffer fills up and eventually gives 
a ring buffer overflow. Just setting the audio PID for these channels works 
fine (i.e. black screen but sound).

Very strange, because BBC1 works every time, the other two channels are on 
the same transponder and I've doublechecked that the settings (apart from 
the PIDs of course) are exactly the same for all of them . Does anyone have 
similar experiences with DVB-T -> DVB-s / dxr in transfer mode in the UK? 


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.