[vdr] Re: Suggestions for tv output?

["Dylan D" <dylan@ozforces.com.au>]

Id like to add recently the specs on the
http://www.s3graphics.com/index.html
where released which are apparently going to be used for video output for
the new 'VIA console'
And it has similar specs to the cx25870/16 Connxant chipset.

I'd like to see some sort of 'standard' for HW specs of tv output the
problem is many video cards use different Chipsets for different Cards. so
standards as i see it is a problem...

Dylan D.
----- Original Message ----- 
From: "Marko Myllymäki" <marko.myllymaki@sci.fi>
To: <vdr@linuxtv.org>
Sent: Tuesday, January 06, 2004 11:47 PM
Subject: [vdr] Re: Suggestions for tv output?


> Hi,
>
> Sorry if I sound like a total ass by saying this, but should it not be the
> hardware, which does the resizing to the video stream?
>
> Should we try to find a most direct way of doing things, which could be
used
> on most HW solutions out there?
>
> So if for example softdevice uses 1280x720 resolution all the time and
> directs Directfb to do the resize according to stream it should provide
> better quality as there is less decoding/encoding phases and with out
> kick-ass CPU?
>
> Possible HW resize method:
> Stream from DVB-x -> demux -> (Softdevice -> decode -> DirectFB with
> instructions to resize according to parameters set by Softdevice) and
result
> is on screen.
>
> SW resize Method:
> Stream from DVB-x -> demux -> decode ->  resize -> encode to MPEG-2 (does
> xine take unencoded video in?) -> xine -> decode -> fbxine?
>
> Br.
> Marko Myllymäki
>
> ----- Original Message ----- 
> From: "Reinhard Nissl" <rnissl@gmx.de>
> To: <vdr@linuxtv.org>
> Sent: Tuesday, January 06, 2004 12:48 AM
> Subject: [vdr] Re: Suggestions for tv output?
>
>
> > Hi,
> >
> > ˙so-8859-1?B?SORt5GzkaW5lbiBKb3Jp?˙jori.hamalainen@teliasonera.com>
wrote:
> > >>So for for 'tv-output' i've either gotta go mpeg decoder or
> > >>tv-out card. Qualty is a big concern with me( the reason why
> > >>I bought a plasma screen, and went digital) I'd like to know
> > >>what people would recommend for best picture output, I'm
> > >>talking on a widescreen 16:9 1'm tv here.
> > >
> > > I think the best available option will be DVI-D -based output.
> > > And use VDR with softdevice-plugin. Or perhaps KVDR might work.
> >
> > My Matrox G550 is dual headed and has one DVI and one VGA connector.
> >
> > > I can compare same recording on DVB-cards composite output (CVBS)
> > > vs. Mplayer output via DVI and must say that the difference is huge.
> >
> > [ snip ]
> >
> > > My goal is to run HDTV 720p mode (1280x720) all the time and let
> > > software output DVB-picture to it in correct aspect ratios and
> > > via de-interlacing (tvtime / dscaler type of software).
> >
> > My Intel Pentium 2.8 GHz HT CPU can decode, scale and deinterlace a
> 1920x1088
> > HDTV 1080i stream (Euro1080) to a size of 960x544 with a maximum CPU
load
> of
> > 70 % (most of the time about 60 %). Kernel 2.6.0 performs even better,
due
> to
> > less peak loads on the two virtual processors. So I think, native HDTV
> 720p
> > mode should be possible with such a machine, using my vdr-xine plugin
with
> > xine / fbxine.
> >
> > Bye.
> > -- 
> > Dipl.-Inform. (FH) Reinhard Nissl
> > mailto:rnissl@gmx.de
> >
> >
> >
> >
> > -- 
> > Info:
> > To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr"
> as subject.
> >
>
>
>
> -- 
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr"
as subject.
>
>



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.