[vdr] Re: DXR3

[Manuel Weiß <Manuel.Weiss@ngi.de>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Laz schrieb:

| On Thursday 04 Nov 2004 18:37, Tony Houghton wrote:
|
|> In <1099565217.4583.7.camel@laser2.york.ac.uk>, Laurence Abbott
|> wrote:
|>
|>> From memory, the dxr3 / Hollywood Plus cards have an em8300
|>> chip and then either a bt865 (mine has) or an adv717x chip.
|>> This is mentioned at http://dxr3.sourceforge.net/ but it isn't
|>> that obvious. Bizarrely, mine is labelled as a Creative dxr3
|>> but lspci shows it as Sigma Designs Hollywood Plus!
|>
|> Ah, so if I need the bt865 module that means I shouldn't need
|> adv717x?
|
|
| Yes. I think it is em8300 plus either bt865 or adv717x , depending
| on which version of the card you have. I cannot remember how I
| worked out which I needed, though.
|
| Cheers,
|
| Laz
|
|
|
|
Hi
to find out, which DAC is on your dxr3 card (bt865, adv717x), and so
which module have to be loaded, just take a look on the card, it's the
little chip on the left of the dxr3 chip. If you do not want to open
your case  (and reboot.....) there's another way - the firmware only
loads into the card, if the right kernel module was inserted... Well-
but that should not mean that it loads correct if you have the right
module and the parameters ;-)

bye

Manuel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBkPdy56YYQkrcmlwRAnGRAKCa6g61RVNLFWRDSIxOLT0zbHKOiQCfTvIH
jMvSxn4DDYyYrZKhBwCZH68=
=Qnb4
-----END PGP SIGNATURE-----