[linux-dvb] Re: TT DVB-T not working

[Nils Ohlmeier <nils.ohlmeier@web.de>]

On Tuesday 19 November 2002 12:24, Jürgen Peitz wrote:
> Am Dienstag, 19. November 2002 09:19 schrieb Nils Ohlmeier:
> > I made and insmoded the driver, and compiled the [s|c|t]zap application.
> > Copied the channels.conf-dvbt-berlin to ~/.tzap/channels.conf and the
> > result from './tzap RTL' looks like this:
> >
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > tuning to 778000000 Hz
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
> > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
>
> Hi,
> channels.conf for tzap is probably not up to date. Frequenzy for RTL DVB-T
> in Berlin is 658000000. This are the values from my vdr channels.conf.
>
> : DVB-T Berlin Germany
> [...]
> Update tzap channels.conf with this values and try to tune to different
> channels. Sometimes it takes a while before they lock.

Hi,
thanks for your help. But the using of tzap should only reproduce the error 
messages i get in the kernel logs (http://www.ohlmeier.de/TT-DVB-T.log).
And also with the correct frequenzy and waiting for more then 15 seconds the 
output of tzap does not change. And if understood it correct i should at 
least get some values different from zero, allthough it may does not lock.

From the logs i would say the driver is not loaded correct or even does not 
support my card. But i'm a newbie to this stuff and may be wrong, That's why 
i'm asking for help with my logs here.

Greetings
   Nils


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.