[vdr] Re: analogtv & Haupaugge PVR350 install question

[Uwe Ortner <uwe.ortner@classic-net.de>]

Am Mit, 2003-11-05 um 21.44 schrieb Tobias Bratfisch:
> On Wednesday 05 November 2003 20:22, you wrote:
> > Right now I cant compile analog plugin ...
> >
> > I get the error message "*** No rule to make target `videodev25.h',
> > needed by `analogtv.o'.  Stop"
> >
> > I think this is due to the mp1 which I didnt install because of the
> > "PVR" card
> >
> > Any ideas what to do?
> 
> Just download mp1e, extract it (you don't have to complie && install it) and 
> set the path to it in the Makefile of the analogtv-plugin, e.g.:
> 
> INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include -I/dir/one/above_mp1e
> 
> Tobias
> 
> 

Thanxs, this works :)

But screen on "Pro7" is black ... 



I added only one additional channel in channels.conf (Kabel Bayern):
Pro7:238250:B6C23D0:C:0:160:80:0:32001:898:0:0:0

 
vdr output:
------------
analogTV: 00:18:54 Detected capture device Vanilla iTVC15 card
analogTV: 00:18:54 This device does'nt have a tuner!
analogTV: 00:18:54 This device cannot capture!
analogTV: 00:19:07 Switching to channel 0 on device 0
analogTV: 00:19:07 Switching to channel 0 on device 4
analogTV: 00:19:07 Channel: Pro7
analogTV: 00:19:07 Videonorm: PAL
analogTV: 00:19:07 Video device: /dev/video2
analogTV: 00:19:07 Video source: 0
analogTV: 00:19:07 Switching to channel 1 on device 4
analogTV: 00:19:07 V4L version 1 detected
analogTV: 00:19:07 Can't open "/dev/dsp", 19:No such device
analogTV: 00:19:07 Switching to channel 1 on device 0
-----------

/var/log/messages:
------------
Nov  6 00:22:56 irmi kernel: ivtv: You've not seen the last of willy!
Nov  6 00:22:58 irmi kernel: Linux video capture interface: v1.00
Nov  6 00:22:58 irmi kernel: DVB: registering new adapter (Siemens cable
card PCI rev1.5).
Nov  6 00:23:00 irmi kernel: ves1820.c: setup for tuner spXXXX
Nov  6 00:23:00 irmi kernel: DVB: registering frontend 0:0 (VES1820
based DVB-C frontend)...
Nov  6 00:23:00 irmi kernel: DVB: registering new adapter (Siemens cable
card PCI rev1.5).
Nov  6 00:23:01 irmi kernel: ves1820.c: setup for tuner spXXXX
Nov  6 00:23:01 irmi kernel: DVB: registering frontend 1:0 (VES1820
based DVB-C frontend)...
Nov  6 00:23:03 irmi kernel: DVB: AV7111(0) - firm f0240009, rtsl
b0250018, vid 71010068, app 80002615
Nov  6 00:23:03 irmi kernel: DVB: AV7111(0) - firmware supports CI link
layer interface
Nov  6 00:23:03 irmi kernel: av7110(0): DVB-C analog module detected,
initializing MSP3400
Nov  6 00:23:05 irmi kernel: DVB: AV7111(1) - firm f0240009, rtsl
b0250018, vid 71010068, app 80002615
Nov  6 00:23:05 irmi kernel: DVB: AV7111(1) - firmware supports CI link
layer interface
Nov  6 00:23:06 irmi kernel: av7110(1): DVB-C analog module detected,
initializing MSP3400
Nov  6 00:23:06 irmi kernel: ivtv: SGarray_size = 340, DSGarray_size =
16
Nov  6 00:23:06 irmi kernel: ivtv: Found an iTVC15 based chip
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o: Adapter: ivtv i2c driver #0
scl: 1  sda: 1 -- testing...
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o:1 scl: 1  sda: 0
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o:2 scl: 1  sda: 1
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o:3 scl: 0  sda: 1
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o:4 scl: 1  sda: 1
Nov  6 00:23:06 irmi kernel: i2c-algo-bit.o: ivtv i2c driver #0 passed
test.
Nov  6 00:23:06 irmi kernel: tuner: probing ivtv i2c driver #0 i2c
adapter [id=0x10005]
Nov  6 00:23:06 irmi kernel: tuner: chip found @ 0xc2
Nov  6 00:23:06 irmi kernel: tuner(bttv): type forced to 5 (Philips
PAL_BG (FI1216 and compatibles)) [insmod]
Nov  6 00:23:06 irmi kernel: saa7114.c: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Nov  6 00:23:06 irmi kernel: saa7114.c: detecting saa7114 client on
address 0x42
Nov  6 00:23:06 irmi kernel: saa7115.c: writing init values
Nov  6 00:23:08 irmi kernel: status: (1E) 0x48, (1F) 0xc0
Nov  6 00:23:08 irmi kernel: msp34xx: init: chip=MSP3418W-A2, has NICAM
support
Nov  6 00:23:08 irmi kernel: msp3410: daemon started
Nov  6 00:23:11 irmi kernel: ivtv: Encoder revision: 0x02040011
Nov  6 00:23:11 irmi kernel: ivtv: Decoder revision: 0x02020023
Nov  6 00:23:11 irmi kernel: ivtv: Device or minor 0 not accepted
Nov  6 00:23:11 irmi kernel: ivtv: Device or minor 1 not accepted
Nov  6 00:23:11 irmi kernel: ivtv: Registered v4l2 device, minor 2
Nov  6 00:23:11 irmi kernel: ivtv: Registered v4l2 device, minor 32
Nov  6 00:23:11 irmi kernel: ivtv: Registered v4l2 device, minor 224
Nov  6 00:23:11 irmi kernel: ivtv: Registered v4l2 device, minor 16
Nov  6 00:23:11 irmi su: (to vdr) root on /dev/pts/0
Nov  6 00:23:11 irmi su: pam_unix2: session started for user vdr,
service su
Nov  6 00:23:11 irmi vdr[1990]: VDR version 1.2.0 started
Nov  6 00:23:11 irmi vdr[1990]: loading plugin:
/usr/local/src/VDR/PLUGINS/lib/libvdr-analogtv.so.1.2.0
Nov  6 00:23:11 irmi vdr[1990]: loading plugin:
/usr/local/src/VDR/PLUGINS/lib/libvdr-tvtv.so.1.2.0
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/setup.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/sources.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/diseqc.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/channels.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/timers.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/commands.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/svdrphosts.conf
Nov  6 00:23:11 irmi vdr[1990]: loading /usr/local/src/VDRCONFIG/ca.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/remote.conf
Nov  6 00:23:11 irmi vdr[1990]: loading
/usr/local/src/VDRCONFIG/keymacros.conf
Nov  6 00:23:11 irmi vdr[1990]: probing /dev/dvb/adapter0/frontend0
Nov  6 00:23:11 irmi vdr[1993]: EIT processing thread started (pid=1993)
- master
Nov  6 00:23:12 irmi vdr[1994]: tuner thread started on device 1
(pid=1994)
Nov  6 00:23:12 irmi vdr[1990]: probing /dev/dvb/adapter1/frontend0
Nov  6 00:23:12 irmi vdr[1996]: EIT processing thread started (pid=1996)
Nov  6 00:23:13 irmi vdr[1997]: tuner thread started on device 2
(pid=1997)
Nov  6 00:23:13 irmi vdr[1990]: probing /dev/dvb/adapter2/frontend0
Nov  6 00:23:13 irmi vdr[1990]: found 2 video devices
Nov  6 00:23:13 irmi vdr[1990]: initializing plugin: analogtv (0.9.11):
Watch analogue TV
Nov  6 00:23:13 irmi vdr[1990]: initializing plugin: tvtv (0.1.6): TVTV
Timers update
Nov  6 00:23:13 irmi vdr[1990]: setting primary device to 1
Nov  6 00:23:13 irmi vdr[1990]: SVDRP listening on port 2001
Nov  6 00:23:13 irmi vdr[1990]: starting plugin: analogtv
Nov  6 00:23:13 irmi vdr[1990]: starting plugin: tvtv
Nov  6 00:23:13 irmi vdr[1990]: TVTV Packed String:
TiEEyW9+Aq5Z1nRzdTBveQ==
Nov  6 00:23:13 irmi vdr[1998]: TVTV Timer Thread started (pid=1998)
Nov  6 00:23:13 irmi vdr[1998]: TVTV Timer Make Update
Nov  6 00:23:13 irmi vdr[1999]: KBD remote control thread started
(pid=1999)
Nov  6 00:23:13 irmi vdr[1990]: remote control KBD - keys known
Nov  6 00:23:13 irmi vdr[1990]: switching to channel 1
Nov  6 00:23:13 irmi vdr[1990]: ERROR: Transfer-Mode kann nicht
gestartet werden!
Nov  6 00:23:15 irmi vdr[1990]: reading EPG data from
/usr/local/src/VDRCONFIG/epg.data
Nov  6 00:23:15 irmi vdr[1990]: setting watchdog timer to 60 seconds
Nov  6 00:23:15 irmi vdr[1990]: switching to channel 1
Nov  6 00:23:15 irmi vdr[2000]: transfer thread started (pid=2000)
Nov  6 00:23:15 irmi vdr[2001]: receiver thread started on device 5
(pid=2001)
Nov  6 00:23:18 irmi vdr[1998]: TVTV Receive 174 Bytes
Nov  6 00:23:18 irmi vdr[1998]: TVTV Timer File processed
Nov  6 00:23:21 irmi vdr[1990]: max. latency time 1 seconds




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.