Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vdr] Re: For VDR-1.2.0: VDR should disable broken cards



Hi Klaus,

> > Having VDR restart when the primary card has a reception problem
> > may be a good idea, but I think VDR should *not* restart, just
> > because a background scan of the EPG fails. Rather it should simply
> > jump over the channel which doesn't deliver anything and continue
> > with the next one
 
> Are you sure that VDR resarts in such a case?
> I can only see emergency exits during actual recordings or if the
> main program loop hangs.

Yes ;o)) 100% sure in case of the 1.1.17. I don't know what
you have changed since then, but if I watch a movie on one
card and the EPG scan kicks in my tech patch nicely shows
the signal strength for each channel scan and as soon as
VDR reaches non available channel, signal strength goes
down to almost zero and the logs show "panic can't sync on
channel "xyz". Sooner or later VDR restarts. Same thing goes
for watching a (already finished) recording. AFAIR the same
thing happend in the 1.1.28 version (last version I had time
to play with)

> > Pretty much the same goes if one of the TV stations decides to
> > change any of the PIDs. Obviously in such a case, VDR cannot
> > tune to the channel and conks out.
 
> I could undertsand this if it were recording, but not during the EPG
> scan.
 
> > What I think VDR should do is:
> > - on an EPG scan: simply ignore channels that don't deliver any data
> >   (this would also prevent a current recording from becoming messed
> >   up just because the EPG scan fails --> I'd rather have no EPG data
> >   than a junked recording)
 
> Where exactly does the EPG scan cause this?

Sorry, I never investigated the true code call that actually causes
this problem I just reconneted the antenna after VDR restarted
3 times in a row ;o))

> > If making a counter (as you will need to store the info "outside" of
> > VDR) is too much trouble, then VDR should *only* restart if it
> > can't get any info from *all* cards (i.e. in a two card system: if
> > tuning fails on both cards ->initiate a restart. If one of the two
> > cards can tune --> use this card (override all other preferences
> > such as which card is the primary card, etc ), but don't restart.

> We'll see...

> For the time being, all those who absolutely don't want the emergency
> exit: just disable it (it's pretty simple to comment out the necessary
> code).

Much easier: Just switching off the EPG scan in the setup does
the trick ;o))


Greetz,
Reinhard


---
Mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.463 / Virus Database: 262 - Release Date: 17.03.2003



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.



Home | Main Index | Thread Index